initial

.minecraft/config/RTG/biomes/tofucraft.cfg

@@ -0,0 +1,749 @@
+# Configuration file
+
+biome {
+
+    tofucraft {
+
+        leekplains {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+        tofubuildings {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+        tofuextremehills {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+        tofuextremehillsedge {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+        tofuforest {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+        tofuforesthills {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+        tofuplainhills {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+        tofuplains {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+        tofuriver {
+            #  [default: true]
+            B:"Allow Villages"=true
+
+            #  [default: false]
+            B:"Allow Volcanoes"=false
+
+            # This setting controls the size of caves.
+            # HIGHER values = BIGGER caves & MORE lag. (14 = vanilla cave density)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Density"=-1
+
+            # This setting controls the number of caves that generate.
+            # LOWER values = MORE caves & MORE lag. (6 = vanilla cave frequency)
+            # Set to -1 to use global setting. Set to 0 to disable caves for this biome.
+            #  [range: -1 ~ 40, default: -1]
+            I:"Cave Frequency"=-1
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff cobble block, enter a valid block ID here (e.g. minecraft:cobblestone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Cobble Block"=
+
+            # If you're using a custom cliff cobble block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff cobble block, you would enter minecraft:wool for the Cliff Cobble Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Cobble Block Meta"=
+
+            # Cliff blocks are the blocks that are used on the cliffs of mountains (usually a blend of stone & cobblestone).
+            # If you want to change this biome's cliff stone block, enter a valid block ID here (e.g. minecraft:stone).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Cliff Stone Block"=
+
+            # If you're using a custom cliff stone block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's cliff stone block, you would enter minecraft:wool for the Cliff Stone Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Cliff Stone Block Meta"=
+
+            # If you want to change this biome's filler block (the block underneath the top block), enter a valid block ID here (e.g. minecraft:dirt).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Filler Block"=
+
+            # If you're using a custom filler block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's filler block, you would enter minecraft:wool for the Filler Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Filler Block Meta"=
+
+            # If you want to change this biome's top block, enter a valid block ID here (e.g. minecraft:grass).
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening#Block_IDs [default: ]
+            S:"RTG Surface: Top Block"=
+
+            # If you're using a custom top block, enter its numeric data value here.
+            # For example, if you want to use red wool for this biome's top block, you would enter minecraft:wool for the Top Block ID,
+            # and you would enter 6 here, because red wool has a data value of 6. (For most blocks, this value will be 0.)
+            # For more info, visit https://minecraft.wiki/w/Java_Edition_data_values/Pre-flattening [default: ]
+            S:"RTG Surface: Top Block Meta"=
+
+            # This setting controls the number of ravines that generate.
+            # LOWER values = MORE ravines & MORE lag. (50 = vanilla ravine frequency)
+            # Set to -1 to use global setting. Set to 0 to disable ravines for this biome.
+            #  [range: -1 ~ 100, default: -1]
+            I:"Ravine Frequency"=-1
+
+            # If FALSE, no RTG decorations will generate in this biome. Instead, only vanilla decorations will generate.
+            # RTG decorations include custom trees, shrubs, boulders, etc. [default: true]
+            B:"Use RTG Decorations"=true
+
+            # If FALSE, no RTG surfaces will be used in this biome. Instead, only vanilla surfaces will be used.
+            # RTG surfaces include custom top & filler blocks, and 'mix' blocks like podzol in Forests. [default: true]
+            B:"Use RTG Surfaces"=true
+
+            # 1/x chance that a volcano will generate if this biome has volcanoes enabled.
+            # 1 = Always generate if possible; 2 = 50% chance; 4 = 25% chance
+            # Set to -1 to use global setting. Set to 0 to disable volcanoes for this biome.
+            #  [range: -1 ~ 2147483647, default: -1]
+            I:"Volcano Chance"=-1
+        }
+
+    }
+
+}
+
+