clientstuff

.minecraft/config/computronics.cfg.bak

@@ -0,0 +1,263 @@
+# Configuration file
+
+camera {
+    # The maximum camera distance, in blocks. [range: 16 ~ 256, default: 32]
+    I:maxDistance=32
+}
+
+
+chatbox {
+    # Enable Creative Chat Boxes. [default: true]
+    B:enableCreative=true
+
+    # Make the normal Chat Box have no range limit and work interdimensionally. [default: false]
+    B:makeMagical=false
+
+    # The maximum chat box distance, in blocks. [range: 4 ~ 32767, default: 40]
+    I:maxDistance=40
+
+    # The Chat Box's default prefix. [default: ChatBox]
+    S:prefix=ChatBox
+}
+
+
+cipherblock {
+    # Decides whether Cipher Blocks can or cannot be locked. [default: true]
+    B:canLock=true
+}
+
+
+enable {
+    B:audioCable=true
+    B:camera=true
+    B:chatBox=true
+    B:cipher=true
+    B:cipher_advanced=true
+    B:ironNoteBlock=true
+    B:lamp=true
+    B:portableTapeDrive=true
+    B:radar=true
+    B:speaker=true
+    B:speechBox=true
+    B:tape=true
+
+    opencomputers {
+        B:beepCard=true
+        B:boomBoard=true
+        B:boomCard=true
+        B:cameraUpgrade=true
+        B:chatboxUpgrade=true
+        B:colorfulUpgrade=true
+        B:lightBoard=true
+        B:magicalMemory=true
+        B:noiseCard=true
+        B:particleCard=true
+        B:rackCapacitor=true
+        B:radarUpgrade=true
+        B:soundCard=true
+        B:speechUpgrade=true
+        B:spoofingCard=true
+        B:switchBoard=true
+    }
+
+    forestry {
+        # Set this to false to disable Forestry bee species for OpenComputers [default: true]
+        B:opencomputersBees=true
+    }
+
+    buildcraft {
+        # Set this to false to disable the Drone Docking Station for OpenComputers [default: true]
+        B:droneDockingStation=true
+    }
+
+    railcraft {
+        B:digitalControllerBox=true
+        B:digitalDetector=true
+        B:digitalReceiverBox=true
+        B:locomotiveRelay=true
+        B:ticketMachine=true
+    }
+
+}
+
+
+general {
+    # Set whether some machines should stop being tickless in exchange for redstone output support. [default: true]
+    B:enableTickingRedstoneSupport=true
+}
+
+
+gregtech {
+    # Set this to false to disable the coordinates function for Gregtech machines [default: true]
+    B:GregtechMachineCoordinates=true
+}
+
+
+##########################################################################################################
+# modcompatibility
+#--------------------------------------------------------------------------------------------------------#
+# Set anything here to false to prevent Computronics from adding the respective Peripherals and Drivers
+##########################################################################################################
+
+modcompatibility {
+    B:enableAE2SpatialIOComponent=true
+    B:enableBuildCraftDrivers=true
+    B:enableDraconicEvolutionEnergyStoragePeripheral=true
+    B:enableEnderIOComponents=true
+    B:enableGregTechDigitalChests=true
+    B:enableGregTechMachines=true
+    B:enableRailcraftRoutingComponents=true
+    B:enableStorageDrawersDriver=true
+}
+
+
+particles {
+    # The maximum range of particle-emitting devices. Set to -1 to make it work over any distance. [range: -1 ~ 65536, default: 256]
+    I:particleRange=256
+}
+
+
+##########################################################################################################
+# power
+#--------------------------------------------------------------------------------------------------------#
+# Every value related to energy in this section uses RF as the base power unit.
+##########################################################################################################
+
+power {
+    # How much energy the Advanced Chipher Block can store [range: 0.0 ~ 100000.0, default: 16000.0]
+    S:cipherEnergyStorage=16000.0
+
+    # How much energy the Advanced Cipher Block should consume for creating a key set [range: 0.0 ~ 100000.0, default: 16000.0]
+    S:cipherKeyConsumption=16000.0
+
+    # How much base energy the Advanced Cipher Block should consume per encryption/decryption task. It will consume this value + 2*(number of characters in message) [range: 0.0 ~ 100000.0, default: 160.0]
+    S:cipherWorkConsumption=160.0
+
+    # How much energy a single beep will cost for 1 second [range: 0.0 ~ 10000.0, default: 10.0]
+    S:ocBeepCardCostPerSound=10.0
+
+    # How much energy will be consumed per tick to keep a Server Self-Destructor active. [range: 0.0 ~ 10000.0, default: 0.2]
+    S:ocBoomBoardMaintenanceCost=0.2
+
+    # How much energy changing the color of the Colorful Upgrade will cost [range: 0.0 ~ 10000.0, default: 2.0]
+    S:ocColorfulUpgradeColorChangeCost=2.0
+
+    # How much energy changing the color or state of a Light Board's light will cost [range: 0.0 ~ 10000.0, default: 2.0]
+    S:ocLightBoardColorChangeCost=2.0
+
+    # How much energy will be consumed per tick to keep a Light Board's light running. Note that this value is consumed for each active light on the board. [range: 0.0 ~ 10000.0, default: 0.2]
+    S:ocLightBoardColorMaintenanceCost=0.2
+
+    # How much energy 1 particle emission should take. Multiplied by the distance to the target. [range: 0.0 ~ 10000.0, default: 2.0]
+    S:ocParticleCardCostPerParticle=2.0
+
+    # How much energy a Rack Capacitor can store. [range: 0.0 ~ 10000.0, default: 7500.0]
+    S:ocRackCapacitorCapacity=7500.0
+
+    # How much energy the sound card will consume per second of processed sound. [range: 0.0 ~ 10000.0, default: 10.0]
+    S:ocSoundCardCostPerSecond=10.0
+
+    # How much energy sending one spoofed message should take [range: 0.0 ~ 10000.0, default: 2.0]
+    S:ocSpoofingCardCostPerMessage=2.0
+
+    # How much energy will be consumed per tick to keep a Switch Board's switch active. Note that this value is consumed for each active switch on the board. [range: 0.0 ~ 10000.0, default: 0.2]
+    S:ocSwitchBoardMaintenanceCost=0.2
+
+    # How much energy each 1-block distance takes by OpenComputers radars. [range: 0.0 ~ 10000.0, default: 50.0]
+    S:radarCostPerBlock=50.0
+
+    railcraft {
+        # How much base energy the Locomotive Relay consumes per operation [range: 0.0 ~ 10000.0, default: 20.0]
+        S:locomotiveRelayBasePower=20.0
+    }
+
+}
+
+
+radar {
+    # The maximum range of the Radar. [range: 0 ~ 256, default: 8]
+    I:maxRange=8
+
+    # Stop Radars from outputting X/Y/Z coordinates and instead only output the distance from an entity. [default: true]
+    B:onlyOutputDistance=true
+}
+
+
+railcraft {
+    # If true, the Locomotive Relay will consumea little bit of Railcraft charge in the locomotive everytime it is accessing the locomotive [default: true]
+    B:locomotiveRelayConsumeCharge=true
+
+    # The range of Locomotive Relays in Blocks. [range: 0 ~ 512, default: 128]
+    I:locomotiveRelayRange=128
+
+    # If true, the Ticket Machine willrequire a little bit of RF to print tickets [default: true]
+    B:ticketMachineConsumeCharge=true
+}
+
+
+recipes {
+    # Set this to true to make some recipes not require OpenComputers blocks and items [default: false]
+    B:easyRecipeMode=false
+
+    # Set this to true to enable GregTech-style recipes [default: true]
+    B:gtRecipeMode=true
+}
+
+
+##########################################################################################################
+# sound
+#--------------------------------------------------------------------------------------------------------#
+# Configs for sounds generated by devices like the Beep Card.
+##########################################################################################################
+
+sound {
+    # The number of audio channels each sound card has. [range: 1 ~ 65536, default: 8]
+    I:ocSoundCardChannelCount=8
+
+    # Maximum delay allowed in a sound card's instruction queue, in milliseconds [range: 0 ~ 2147483647, default: 5000]
+    I:ocSoundCardMaxDelay=5000
+
+    # Maximum  number of instructons allowed in a sound cards instruction queue. This directly affects the maximum size of the packets sent to the client. [range: 0 ~ 2147483647, default: 1024]
+    I:ocSoundCardQueueSize=1024
+
+    client {
+        # The radius in which generated sounds can be heard. [range: 0 ~ 64, default: 24]
+        I:soundRadius=24
+
+        # The sample rate used for generating sounds. Modify at your own risk. [range: 0 ~ 2147483647, default: 44100]
+        I:soundSampleRate=44100
+
+        # The base volume of generated sounds. [range: 0 ~ 127, default: 127]
+        I:soundVolume=64
+    }
+
+}
+
+
+tapedrive {
+    # The amount of time (in milliseconds) used for pre-buffering the tape for audio playback. If you get audio playback glitches in SMP/your TPS is under 20, RAISE THIS VALUE! [range: 500 ~ 10000, default: 750]
+    I:audioPreloadMs=750
+
+    # The distance up to which Tape Drives can be heard. [range: 0 ~ 64, default: 24]
+    I:hearingDistance=24
+
+    # The lengths of the computronics tapes. Should be 10 numbers separated by commas [default: 4,8,16,32,64,2,6,16,128,128]
+    S:tapeLengths=4,8,16,32,64,2,6,16,128,128
+
+    portable {
+        # The distance up to which Portable Tape Drives can be heard. [range: 0 ~ 64, default: 8]
+        I:hearingDistance=8
+    }
+
+}
+
+
+tts {
+    # Enable Text To Speech. To use it, install MaryTTS, a language and a corresponding voice into the marytts directory of your minecraft instance. For installation instructions, see http://wiki.vex.tty.sh/wiki:computronics:mary [default: true]
+    B:enableTextToSpeech=true
+
+    # The maximum number of text bytes the speech box can process at a time. [range: 0 ~ 100000, default: 300]
+    I:maxPhraseLength=300
+}
+
+